Network Setting Items

You can change the network settings using various methods.

Network Setting Items

The setting items you can change using NetSpot Device Installer, FTP Client, or the control panel on the printer are as follows.
NOTE
The settings that you cannot specify using FTP Client, NetSpot Device Installer, or the control panel on the printer
Specify them using a Web browser (Remote UI).
(However, you cannot specify the settings with even using the Remote UI.)
About the item names
In the following table, the characters shown in parentheses are exclusively for FTP Client.
For example, "[IP Address] (INT_ADDR)" is displayed differently as follows, depending on the application.
Web browser (Remote UI):
[IP Address]
NetSpot Device Installer:
[IP Address]
config file of FTP Client:
[INT_ADDR]
Control Panel:
[IP Address]

General Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[Device Name]
(DEVICE_NAME)
Up to 32 characters
LBP6750dn
[Location]
(SYS_LOC)
Up to 32 characters
(Blank)
[Administrator]
(SYS_CONTACT)
Up to 32 characters
(Blank)
[Administrator Password]
(ROOT_PWD)
Up to 16 characters
(Blank)
[Permit End-user's Job Operation]
(USER_JOB_CONT)
ON, OFF
OFF
Support Links
[Link]
(LINK_NAME#) (# = 1 or 2)
Up to 32 characters
CANON.INC
[URL]
(LINK_URL#) (# = 1 or 2)
Up to 128 alphanumeric characters
http://www.canon.com
[Comments]
(LINK_COMMENT#) (# = 1 or 2)
Up to 64 characters
(Blank)

TCP/IP (IP v. 4) Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings Using NetSpot Device Installer
Settings Using FTP Client
Settings Using the Control Panel
[Use DHCP] (DHCP_ENB)
ON, OFF
OFF
[Use RARP] (RARP_ENB)
ON, OFF
OFF
[Use BOOTP] (BOOTP_ENB)
ON, OFF
OFF
[IP Address] (INT_ADDR)
IP address
0.0.0.0
[Subnet Mask] (NET_MASK)
IP address
0.0.0.0
[Gateway Address] (DEF_GW)
IP address
0.0.0.0
[Primary DNS Server Address] (DNS_PADDR)
IP address
0.0.0.0
[Secondary DNS Server Address] (DNS_SADDR)
IP address
0.0.0.0
[DNS Host Name] (HOST_NAME)
Up to 47 characters
"Canon" + "Last 6 digits of the MAC address"
[DNS Domain Name] (DOMAIN_NAME)
Up to 47 characters
(Blank)
[DNS Dynamic Update] (DDNS_ENB)
ON, OFF
OFF
[WINS Resolution] (WINS_ENB)
ON, OFF
OFF
[WINS Server Address] (WINS_SERVER)
IP address
0.0.0.0
[Scope ID] (WINS_SCOPEID)
Up to 63 characters
(Blank)
[SMB Server Name] (SMB_SERVER)
Up to 15 alphanumeric characters
(Blank)
[SMB Workgroup Name] (SMB_WG)
Up to 15 alphanumeric characters
(Blank)
[ARP/PING] (ARP_PING_ENB)
ON, OFF
ON
[FTP Print] (FTP_PRINT_ENB)
ON, OFF
OFF
[FTP Print User Name] (FTP_PRINT_USER)
Up to 24 characters
(Blank)
[FTP Print Password] (FTP_PRINT_PWD)
Up to 24 characters
(Blank)
[FTP Settings]
ON, OFF
OFF
[LPD Print] (LPD_ENB)
ON, OFF
ON
[Print LPD Banner Page] (LPD_BANN)
ON, OFF
OFF
[RAW Print] (RAW_ENB)
ON, OFF
ON
[Bidirectional Communication] (RAW_BIDIR_ENB)
ON, OFF
OFF
[IPP Print] (IPP_ENB)
ON, OFF
ON
[SSL]
ON, OFF (Fixed at OFF when a key is not registered.)
OFF
[IPP Authentication] (IPP_AUTH_ENB)
ON, OFF
OFF
[IPP User Name] (IPP_AUTH_ACCUNT1)
Up to 24 characters (Must be entered when using IPP Authentication)
(Blank)
[IPP Password] (IPP_AUTH_PASSWD1)
Up to 24 characters (Must be entered when using IPP Authentication)
(Blank)
[WSD Print] (WSD_ENB)
ON, OFF
ON
[WSD Browsing] (WSD_BROWSING)
ON, OFF
ON
[Multicast Discovery] (WSD_MULTICAST_DISCOVERY)
ON, OFF
ON
[HTTP] (HTTP_ENB)
ON, OFF
ON
[Proxy]
ON, OFF
OFF
[HTTP Proxy Server Address]
Up to 128 alphanumeric characters
(Blank)
[HTTP Proxy Server Port Number]
0 to 99999
80
[Use Proxy within the Same Domain]
ON, OFF
OFF
[Proxy Authentication]
ON, OFF
OFF
[User Name]
Up to 24 alphanumeric characters
(Blank)
[Password]
Up to 24 alphanumeric characters
(Blank)
[SNTP] (SNTP_ENB)
ON, OFF
OFF
[NTP Server Name] (SNTP_ADDR)
IP address or host name
(Blank)
[Polling Interval] (SNTP_INTERVAL)
Interval for synchronizing time (1 to 48 hours)
24
[Response to Multicast Discovery] (DISCOVERY_ENB)
ON, OFF
ON
[Scope Name] (DISCOVERY_SCOPE_NAME)
Scope name to be used for discovery using utility software such as NetSpot Device Installer. (Up to 32 characters)
"default"
IP Address Range Settings
[Receive/Print Range Setting] [Enable Reject Address] [Reject IP Addresses]
ON, OFF
IP address (Up to 8)
OFF 0.0.0.0
[Receive/Print Range Setting] [Enable Permit Address] [Permit IP Addresses]
ON, OFF
IP address (Up to 8)
OFF 0.0.0.0
[Setting/Browse Range Setting] [Enable Reject Address] [Reject IP Addresses]
ON, OFF
IP address (Up to 8)
OFF 0.0.0.0
[Setting/Browse Range Setting] [Enable Permit Address] [Permit IP Addresses]
ON, OFF
IP address (Up to 8)
OFF 0.0.0.0

TCP/IP (IP v. 6) Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings Using NetSpot Device Installer
Settings Using FTP Client
Settings Using the Control Panel
[IP v. 6] (IPV6_USE)
ON, OFF
OFF
[Stateless Address] (IPV6_STATELESS_USE)
ON, OFF
ON
[Manual Address] (IPV6_MANUAL_ADDR_USE)
ON, OFF
OFF
[IP Address] (IPV6_MANUAL_ADDR_SET)
IP address
(Blank)
[Prefix Length] (IPV6_MANUAL_ADDR_PREFIX)
0 to 128
64
[Default Router Address] (IPV6_MANUAL_ROUTER_ADDR)
IP address
(Blank)
[DHCP v.6] (IPV6_DHCPV6_USE)
ON, OFF
OFF
[Primary DNS Server Address] (IPV6_DNS_ADDRESS_PRI)
IP address
(Blank)
[Secondary DNS Server Address] (IPV6_DNS_ADDRESS_SEC)
IP address
(Blank)
[Same Host Name/Domain Name as IP v.4] (IPV6_DNS_V6_USE)
ON, OFF
OFF
[DNS Host Name] (IPV6_DNS_HOST_NAME_V6)
Up to 47 characters
"Canon" + "Last 6 digits of the MAC address"
[DNS Domain Name] (IPV6_DNS_DOMAIN_NAME_V6)
Up to 47 characters
(Blank)
[DNS Dynamic Update] (IPV6_DNS_DYNAMEC_SET)
ON, OFF
OFF
[Register Stateless Address] (IPV6_DNS_STATELESS)
ON, OFF
OFF
[Register Manual Address] (IPV6_DNS_MANUAL)
ON, OFF
OFF
[Register Stateful Address] (IPV6_DNS_STATEFUL)
ON, OFF
OFF
IP Address Range Settings
[Receive/Print Range Setting] [Enable Reject Address] [Reject IP Addresses]
IP address (Up to 8)
(Blank)
[Receive/Print Range Setting] [Enable Permit Address] [Permit IP Addresses]
IP address (Up to 8)
(Blank)
[Setting/Browse Range Setting] [Enable Reject Address] [Reject IP Addresses]
IP address (Up to 8)
(Blank)
[Setting/Browse Range Setting] [Enable Permit Address] [Permit IP Addresses]
IP address (Up to 8)
(Blank)

NetWare Network Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings Using NetSpot Device Installer
Settings Using FTP Client
Settings Using the Control Panel
[NetWare] (NW_ENB.)
ON, OFF
OFF
[Frame Type] (NW_FRAME_TYPE.)
Frame type used by NetWare
Auto Detect
[Network Address]
(Display only)
[Node Address]
(Display only)
[Print Service] (NW_PRINT_SERVICE.)
Print service to be used
NDS PServer
Bindery PServer
[File Server Name] (NW_PSERVER_FILE_SERVER_
NAME.)
Name of the NetWare file server to which the NetWare print server belongs (1 to 47 characters)
(Blank)
[Print Server Name] (NW_PSERVER_FILE_SERVER_
NAME.)
NetWare print server name to be used (1 to 47 characters)
(Blank)
[Print Server Password] (NW_PSERVER_PASSWD.)
Password for accessing the print server (0 to 20 characters)
(Blank)
[Printer Number] (NW_PSERVER_PRINTER_NO.)
Number for the printer connected to the NetWare print server (0 to 15)
(Blank)
[Service Mode] (NW_PSERVER_SERVICE_MODE.)
Service mode to be used
1 (psMode1): Only the currently loaded paper can be serviced.
2 (psMode2): Paper can be changed as needed.
3 (psMode3): The order of the jobs is rearranged to minimize the frequency of changing paper.
4 (psMode4): The order of the jobs in a queue is rearranged to minimize the frequency of changing paper.
4
[Printer Form] (NW_PSERVER_PRINTER_FORM.)
Paper Define Form (0 to 255)
0
[Polling Interval] (NW_PSERVER_POLLING_INT.)
Interval for checking the jobs (1 to 15 seconds)
5
[Buffer Size] (NW_PSERVER_BUFFER_SIZE.)
Data Buffer Size (1 to 20 KB)
20
NDS PServer
[Tree Name](NW_NDSSERVER_TREE_NAME.)
Name of the NDS tree to which the NetWare print server belongs (1 to 32 characters)
(Blank)
[Context Name] (NW_NDSSERVER_CONTEXT_
NAME.)
Name of the context to which the NetWare print server belongs (1 to 255 characters)
(Blank)
[Print Server Name] (NW_NDSSERVER_PRINT_
SERVER_NAME.)
NetWare print server name to be used (1 to 64 characters)
(Blank)
[Print Server Password] (NW_NDSSERVER_PRINT_
SERVER_PASSWORD.)
Password for accessing the print server (0 to 20 characters)
(Blank)
[Printer Number] (NW_NDSSERVER_PRINTER_NO.)
Number for the printer connected to the NetWare print server (0 to 254)
0
[Service Mode] (NW_NDSSERVER_SERVICE_
MODE.)
Service mode to be used
1 (psMode1): Only the currently loaded paper can be serviced.
2 (psMode2): Paper can be changed as needed.
3 (psMode3): The order of the jobs is rearranged to minimize the frequency of changing paper.
4 (psMode4): The order of the jobs in a queue is rearranged to minimize the frequency of changing paper.
4
[Printer Form] (NW_NDSSERVER_PRINTER_FORM.)
Paper Define Form (0 to 255)
0
[Polling Interval] (NW_NDSSERVER_POLLING_INT.)
Interval for checking the jobs (1 to 255 seconds)
5
[Buffer Size]
(NW_NDSSERVER_BUFFER_SIZE.)
Data Buffer Size (3 to 20 KB)
20
RPrinter
[File Server Name] (NW_RPRINTER_FILE_SERVER_
NAME.)
Name of the NetWare file server to which the NetWare print server belongs (1 to 47 characters)
(Blank)
[Print Server Name] (NW_RPRINTER_PRINT_SERVER_
NAME.)
NetWare print server name to be used (1 to 47 characters)
(Blank)
[Printer Number] (NW_RPRINTER_PRINTER_NO.)
Number for the printer connected to the NetWare print server (0 to 15)
0
NPrinter
[Print Server Name] (NW_NPRINTER_PRINT_SERVER_
NAME.)
NetWare print server name to be used (1 to 64 characters)
(Blank)
[Tree Name](NW_NPRINTER_TREE_NAME.)
Name of the NPrinter tree to which the NetWare print server belongs (1 to 32 characters)
(Blank)
[Context Name] (NW_NPRINTER_CONTEXT_NAME.)
Name of the context to which the NetWare print server belongs (1 to 256 characters)
(Blank)
[Printer Number](NW_NPRINTER_PRINTER_NO.)
Number for the printer connected to the NetWare print server (0 to 254)
0

AppleTalk Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[AppleTalk]
(ATLK_ENB)
ON, OFF
OFF
[Phase]
Fixed at [Phase 2]
2
[Service Name]
(APRINT_1)
Up to 32 characters *1
LBP6750dn
[Zone]
(ATK_ZONE)
Up to 32 characters *2
*
[PS Print Processing]*3
[Spool]
[Direct]
[Spool]
[Direct]
*1
"=", "@", "*", ":", and "~" cannot be used.
*2
"=", "@", ":", and "~" cannot be used.
*3
Can be specified only when PS ROM or PS/Barcode ROM is installed.

SNMP Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[SNMP v. 1]
(SNMP_V1_ENB)
ON, OFF
ON
[Community Name 1]
(SNMP_COMMUNITY1_ENB)
ON, OFF
ON
[MIB Access Permission]
(SNMP_COMMUNITY1_ACCESS)
RW, RO
([Read/Write], [Read Only])
RO
[Read Only]
[Community Name]
(SNMP_COMMUNITY1_NAME)
Up to 32 characters
public
[Community Name 2]
(SNMP_COMMUNITY2_ENB)
ON, OFF
OFF
[MIB Access Permission]
(SNMP_COMMUNITY2_ACCESS)
RW, RO
([Read/Write], [Read Only])
RO
[Read Only]
[Community Name]
(SNMP_COMMUNITY2_NAME)
Up to 32 characters
public2
[SNMP v. 3]
(SNMP_V3_ENB)
ON, OFF
OFF
[Get Printer Management Information from Host]
(SNMP_GET_PRT_MNG_INFO)
ON, OFF
OFF

User Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[User Name]
Up to 32 alphanumeric characters
initial
[MIB Access Permission]
[Read/Write], [Read Only]
[Read/Write]
[Security Settings]
[Authentication Yes/Encryption Yes], [Authentication Yes/Encryption No], [Authentication No/Encryption No]
[Authentication Yes/Encryption Yes]
[Authentication Algorithm]
MD5, SHA1
MD5
[Authentication Password] *
6 to 16 alphanumeric characters
initial
[Encryption Algorithm]
Fixed at [DES]
DES
[Encryption Password] *
6 to 16 alphanumeric characters
initial
*
Can be specified only when the printer is in the state of SSL encrypted communication. (If the printer is not in the state of encrypted communication, specify the setting using the printer's control panel.)

Context Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[Context Name]
Up to 32 alphanumeric characters
(Blank)

Startup Time Setting

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[Startup Waiting Time]
(STRT_DELAY_TIME)
Waiting time from when you turn the printer ON to when the printer starts obtaining the address (0 to 300 seconds)
0

Ethernet Driver Setting*

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[Ethernet Driver Setting]
[Auto Detect], [10 Base-T (Half Duplex)], [10 Base-T (Full Duplex)], [100 Base-TX (Half Duplex)], [100 Base-TX (Full Duplex)]
Auto Detect
*
Can be specified only if [Primary Network Setting] is set to [Standard Network]

Remote UI Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[Remote UI](RUI_ENB)*
Turing ON or OFF the Remote UI
ON
[SSL]
ON, OFF
OFF
*
Can be specified only by FTP Client or the printer's control panel

Permitted Receiving MAC Address Settings*

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[Enable Permitted Receiving MAC Address]
ON, OFF
OFF
[MAC Address]
MAC address (Up to 50)
0:0:0:0:0:0
*
Can be specified only if [Primary Network Setting] is set to [Standard Network]

Key and Certificate Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings Using NetSpot Device Installer
Settings Using FTP Client
Settings Using the Control Panel
[Key Name]
Up to 24 alphanumeric characters
(Blank)
[Key Algorithm]
Fixed at [RSA]
RSA
[Key Length]
512 bit, 1024 bit
512
[Start Date of Validity]
Day/Month/Year (01/01/2000 to 31/12/2048)
(Blank)
[End Date of Validity]
Day/Month/Year (01/01/2000 to 31/12/2048)
(Blank)
[Select Country/Region Name]*
Registered country/region name
United Kingdom (GB)
[Enter Internet Country Code]*
Up to 2 alphanumeric characters
(Blank)
[State]*
Up to 24 alphanumeric characters
(Blank)
[City]*
Up to 24 alphanumeric characters
(Blank)
[Organization]*
Up to 24 alphanumeric characters
(Blank)
[Organization Unit]*
Up to 24 alphanumeric characters
(Blank)
[Common Name]*
Up to 24 alphanumeric characters
(Blank)
[File Path] for a private key
The path of a key/certificate file
(Blank)
[Key Name] of a private key
Up to 24 alphanumeric characters
(Blank)
[Password] of a private key
Up to 24 alphanumeric characters
(Blank)
*
When issuing the certificate, at least one of seven options needs to be specified.

CA Certificate

: Can be specified: Cannot be specified
Option
Contents
Default
Settings Using NetSpot Device Installer
Settings Using FTP Client
Settings Using the Control Panel
[CA Certificate]
Default CA Certificate
[Register CA Certificate]

Job Log Display

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[Job Log Display]
ON, OFF
ON
[Obtain Job Log from Management Software]
ON, OFF
ON

Software That Can Be Used for the Network Settings

You can perform the network settings for this printer using the following software.
:
Specifiable
:
Not specifiable
:
Can perform a part of the settings
Setting Type
Web Browser (Remote UI)
FTP Client
NetSpot Device Installer
ARP/PING Command
Control Panel of the Printer
Configuring the Ethernet Driver
Configuring the Communication Environment
Setting the IP Address of the Printer
Setting the TCP/IP Protocol
Setting IP v. 6
Preparing the NetWare Protocol Settings
Setting the NetWare Protocol
Setting the AppleTalk Protocol
Changing the Device Name or Administrator Information
Changing the Administrator Password
Specifying the Job Operation Permission for End-users
Restricting the Job Requests by Certain Devices
0038-06L