Printing Received E-mail (E-Mail Print)

Printing Received E-mail (E-Mail Print)

E-Mail Print allows you to print the message and attached JPEG or TIFF image files of an e-mail received from the POP3 mail server without using a computer. E-mails can be manually received as well as being automatically received at regular intervals. When the SMTP protocol is used, e-mails directly sent to the machine via no mail server are printed.
 
When you set <TIFF Spooler> in the Setup menu to <On>, the received data is temporarily stored in the machine or SD card before printed. This reduces the occurrence of errors. TIFF Spooler
Outline of E-Mail Print
General
An e-mail message is printed with e-mail header information.
An HTML e-mail message is printed as a plain text.
If a line (without line feed) in an e-mail message contains more than 1,000 characters, excessive characters are placed on a new line and may not be correctly printed.
When <TIFF Spooler> is set to <On>
If the e-mail message size exceeds 25 MB or the e-mail size exceeds 1.5 GB, the e-mail message is not printed.
If the e-mail header data exceeds 20 KB, the excessive data is not printed.
If no SD card is installed, TIFF files exceeding 40 MB in size may not be printed.
If the SD card has no sufficient free space, E-Mail Print is not available.
When the toner cartridge is nearly empty, no e-mails can be received.
Supported e-mail encoding formats
7bit
8bit
binary
uuencode
x-uuencode
base64
quoted-printable
Supported e-mail character sets
us-ascii
iso-8859-1
iso-8859-15
(If any character set is not specified, "us-ascii" is applied.)
Printable Formats of Attached Image Files
The E-Mail Print function supports the following types of image files.
JPEG file
TIFF file
Some files are unavailable depending on the file structure.
You can print up to three attached files for each e-mail. (Excessive attached files are not printed.)
If the SD card is installed, the printable file size is 100 MB or less per file.

Configuring E-Mail Print Settings

This section describes how to specify the settings for receiving and printing e-mails on this machine. Use a computer to specify the settings for receiving e-mails and the operation panel of the machine to specify the settings for printing e-mails.
From a Computer
1
Start the Remote UI and log on in Management Mode. Starting Remote UI
2
Click [Settings/Registration].
3
Click [Network]  [E-Mail Print Settings].
4
Click [Edit].
5
Specify the settings for E-Mail Print.
When performing E-Mail Print from POP3 mail server
When performing E-Mail Print by using SMTP protocol
6
Click [OK].
7
Perform a hard reset.
Click [Device Control], select [Hard Reset], and then click [Execute].
The settings are enabled after the hard reset is performed.
From the Operation Panel
8
Specify other settings for E-Mail Print as necessary.
Specify whether or not to print the e-mail message.
You can limit the number of pages to print the e-mail message.
You can specify the settings for printing attached image files.
Specify whether or not to display an E-Mail Print error.

Manually Receiving E-Mails

If e-mail printing from the POP3 mail server is enabled, you can manually receive and print e-mails as well. When you want to connect to the mail server before automatically receiving e-mails or the machine is configured to prevent e-mails from being automatically received, follow the procedure below to manually receive the e-mails.
1
Press  ().
When the machine is offline, it does not operate even if  () is pressed. Set the machine to Online. Online key
2
Use / to select <E-Mail Print Utility>, and press .
3
Select <Received E-Mail>, and press .
4
Select <Yes>, and press .
The machine is connected to the mail server. E-Mail Print is started for new e-mails in the mailbox of the mail server if any.
To forward fax documents from Canon multifunction printers
Enable SMTP RX on this machine, and then specify the IP address of the machine as the Internet Fax (I Fax) Address on the source multifunction printer. Forwarded fax documents are printed immediately when received.
Attached files can only be printed if they are in TIFF format. Only one TIFF file can be printed for each fax document.
When the toner cartridge is nearly empty, no fax documents can be received. The fax documents that could not be received on this machine are printed on the source multifunction printer.
When the optional SD card is installed on the machine, the maximum size of a printable TIFF file is limited to 100 MB.
167A-02K