Optional Equipment

When the Staple Finisher-Q1 PRO/Booklet Finisher-Q1 PRO is attached
1.
Booklet Trimmer-D1
If the Booklet Trimmer-D1 is attached to the Booklet Finisher-Q1 PRO, the fore edge of saddle stitched copies can be trimmed for neat output. For more information on the Booklet Trimmer-D1, see the instruction manual of the Booklet Trimmer-D1.
2.
Staple-P1
The Staple-P1 can be attached to the Booklet Finisher-Q1 PRO for saddle stitching.
3.
Booklet Finisher-Q1 PRO
The Booklet Finisher-Q1 PRO is equipped with the following features: Collate, Group, Staple (Corner, Double, Saddle Stitch), and Saddle Fold.
4.
Paper Folding Unit-H1
If the Paper Folding Unit-H1 is attached to the Staple Finisher-Q1 PRO or Staple Finisher-Q1 PRO, the paper can be folded in 5 different ways (Z-Fold, Half Fold, C-Fold, Accordion Z-Fold, Double Parallel Fold).
5.
Professional Puncher Integration Unit-B1
The Professional Puncher Integration Unit-B1 reverses the paper punched by the Professional Puncher-C1 to prevent a paper jam.
6.
Professional Puncher-C1
The Professional Puncher-C1 punches several types of holes. For more information on the Professional Puncher-C1, see the instruction manual of the Professional Puncher-C1.
7.
Document Insertion Unit-K1
If the Document Insertion Unit-K1 is attached, a different type of paper from the body of the document can be inserted for a cover or insert.
8.
Duplex Color Image Reader Unit-G1
You can scan documents such as books, thick originals, thin originals, and transparencies on the platen glass of the Duplex Color Image Reader Unit-G1. A single original can be sent from documents gathered in the feeder attached to the Duplex Color Image Reader Unit-G1.
9.
POD Deck Lite-A1
If the POD Deck Lite-A1 is attached, it can provide an additional paper source. The POD Deck Lite-A1 holds up to 3,500 sheets of paper (80 g/m2).
10.
Copy Card Reader-F1
The Copy Card Reader-F1 enables Department ID Management to be performed through the use of cards.
11.
Utility Tray-A2
The Utility Tray-A2 provides space for placing originals.
12.
Paper Deck Unit-C1
If the Paper Deck Unit-C1 is attached, it can provide an additional paper source. The Paper Deck Unit-C1 holds up to 3,500 sheets of paper (80 g/m2).
13.
Printer Cover-B1
Instead of the Duplex Color Image Reader Unit-G1, you can attach the Printer Cover-B1.
14.
Puncher Unit-BT1
The Puncher Unit-BT1 is equipped with the Hole Punch mode. The Puncher Unit-BT1 can be attached only if the Staple Finisher-Q1 PRO or Booklet Finisher-Q1 PRO is attached.
15.
Staple-N1
The Staple-N1 can be attached to the Staple Finisher-Q1 PRO or Booklet Finisher-Q1 PRO for stapling (Corner/Double).
16.
Staple Finisher-Q1 PRO
The Staple Finisher-Q1 PRO is equipped with the following features: Collate, Group, Offset, and Staple (Corner and Double).
17.
Tab Feeding Attachment Kit-B1
The Tab Feeding Attachment Kit-B1 can only be attached to Paper Drawer 3 or 4, and holds only tab papers.
When the Staple Finisher-N1/Booklet Finisher-N1 is attached
1.
Inner Booklet Trimmer-A1
If the Inner Booklet Trimmer-A1 is attached to the Booklet Finisher-N1, the Trim mode can be used to trim the edges of the booklet.
2.
Staple-P1
The Staple-P1 can be attached to the Booklet Finisher-N1 for saddle stitching.
3.
Booklet Finisher-N1
The Booklet Finisher-N1 is equipped with the following features: Collate, Group, Offset, Staple (Corner/Double/Saddle Stitch), and Saddle Fold.
4.
Paper Folding Unit-H1
If the Paper Folding Unit-H1 is attached to the Staple Finisher-N1 or Booklet Finisher-N1, the paper can be folded in 5 different ways (Z-Fold, Half Fold, C-Fold, Accordion Z-Fold, Double Parallel Fold).
5.
Professional Puncher Integration Unit-B1
The Professional Puncher Integration Unit-B1 reverses the paper punched by the Professional Puncher-C1 to prevent a paper jam.
6.
Professional Puncher-C1
The Professional Puncher-C1 punches several types of holes. For more information on the Professional Puncher-C1, see the instruction manual of the Professional Puncher-C1.
7.
Document Insertion Unit-K1
If the Document Insertion Unit-K1 is attached, a different type of paper from the body of the document can be inserted for a cover or insert.
8.
Duplex Color Image Reader Unit-G1
You can scan documents such as books, thick originals, thin originals, and transparencies on the platen glass of the Duplex Color Image Reader Unit-G1. A single original can be sent from documents gathered in the feeder attached to the Duplex Color Image Reader Unit-G1.
9.
POD Deck Lite-A1
If the POD Deck Lite-A1 is attached, it can provide an additional paper source. The POD Deck Lite-A1 holds up to 3,500 sheets of paper (80 g/m2).
10.
Copy Card Reader-F1
The Copy Card Reader-F1 enables Department ID Management to be performed through the use of cards.
11.
Utility Tray-A2
The Utility Tray-A2 provides space for placing originals.
12.
Paper Deck Unit-C1
If the Paper Deck Unit-C1 is attached, it can provide an additional paper source. The Paper Deck Unit-C1 holds up to 3,500 sheets of paper (80 g/m2).
13.
Printer Cover-B1
Instead of the Duplex Color Image Reader Unit-G1, you can attach the Printer Cover-B1.
14.
Puncher Unit-BF1/Puncher Unit-BG1
The Puncher Unit-BF1 or Puncher Unit-BG1 is equipped with the Hole Punch mode. The Puncher Unit-BF1 or Puncher Unit-BG1 can be attached only if the Staple Finisher-N1 or Booklet Finisher-N1 is attached.
15.
Staple-N1
The Staple-N1 can be attached to the Staple Finisher-N1 or Booklet Finisher-N1 for stapling (Corner/Double).
16.
Staple Finisher-N1
The Staple Finisher-N1 is equipped with the following features: Collate, Group, Offset, and Staple (Corner/Double).
17.
Tab Feeding Attachment Kit-B1
The Tab Feeding Attachment Kit-B1 can only be attached to Paper Drawer 3 or 4, and holds only tab papers.
22H4-037