Available Paper Stock

The paper types that can be used with this machine are shown in the following table. Icons indicating the type of paper loaded in each paper drawer can be displayed on the paper selection screen if you store that information in the machine beforehand. (See "Registering the Paper Size and Type for a Paper Source.")
: Available -: Unavailable
Paper Type
Paper Source
Paper Drawer 1, 2
(52 to 220 g/m2)
Paper Drawer 3, 4
(52 to 220 g/m2)
Multi-Purpose Tray
(52 to 256 g/m2)
Paper Deck Unit-C1
(52 to 220 g/m2)
POD Deck Lite-A1
(52 to 256 g/m2)
Document Insertion Unit-K1
(52 to 256 g/m2)
Thin
(52 to 63 g/m2)
Plain
(64 to 90 g/m2)
Recycled*1
(64 to 90 g/m2)
Colour
(64 to 90 g/m2)
Heavy 1
(91 to 180 g/m2)
Heavy 2
(181 to 220 g/m2)
Heavy 3
(221 to 256 g/m2)
-
-
-
1-Sided Coated 1
(106 to 180 g/m2)
-
-
-
-
-
1-Sided Coated 2
(181 to 220 g/m2)
-
-
-
-
-
1-Sided Coated 3
(221 to 256 g/m2)
-
-
-
-
-
2-Sided Coated 1
(106 to 180 g/m2)
-
-
-
-
-
2-Sided Coated 2
(181 to 220 g/m2)
-
-
-
-
-
2-Sided Coated 3
(221 to 256 g/m2)
-
-
-
-
-
Letterhead
(151 to 180 g/m2)
Transparency*2
(151 to 180 g/m2)
-
-
-
-
Labels
(151 to 180 g/m2)
-
-
-
-
Tracing*3
(64 to 90 g/m2)
-
-
-
-
Bond
(90 g/m2)
Tab
(151 to 220 g/m2)
-
-
-
-
Pre-Punched
(64 to 90 g/m2)
*1 You can use 100% recycled paper.
*2 Use only A4 or A4R transparencies made especially for this machine.
*3 Some types of tracing paper cannot be used.
: Available -: Unavailable
Paper Size
Width x Length
Paper Source
Paper Drawer 1, 2
Paper Drawer 3, 4
Multi-Purpose Tray
Paper Deck Unit-C1
POD Deck Lite-A1
Document Insertion Unit-K1
-
330 mm x 483 mm
-
-
SRA3
320 mm x 450 mm
-
-
-
305 mm x 457 mm
-
-
-
279 mm x 432 mm
-
-
A3
297 mm x 420 mm
-
-
A4
297 mm x 210 mm
A4R
210 mm x 297 mm
-
-
A5R
148 mm x 210 mm
-
-
-
-
B4
257 mm x 364 mm
-
-
B5
257 mm x 182 mm
B5R
182 mm x 257 mm
-
-
-
Custom Size
100 mm x 148 mm to 330.2 mm x 487.7 mm
-
-
*1
-
-
-
139.7 mm x 182 mm to 330.2 mm x 487.7 mm
-
-
-
-
-
182 mm x 182 mm to 330.2 mm x 487.7 mm
-
-
-
-
-
Free Size
100 mm x 148 mm to 330.2 mm x 487.7 mm
-
-
*1
-
-
-
*1 If the Staple Finisher-Q1 PRO/Booklet Finisher-Q1 PRO is attached, the paper whose parallel length to the feeding direction is less than 182 mm cannot be fed into the multi-purpose tray. Furthermore, the paper whose width is less than 182 mm, such as B6 size, cannot be output from the Tray B.
NOTE
For instructions on loading paper, see the following sections:
Paper Drawers: "Loading Paper."
Multi-Purpose Tray: "Loading Paper into the Multi-Purpose Tray."
Paper Deck Unit-C1/POD Deck Lite-A1: "Loading Paper into the Paper Deck Unit-C1/POD Deck Lite-A1 (Optional)."
Document Insertion Unit-K1: "Loading Paper into the Document Insertion Unit-K1 (Optional)."
The Paper Deck Unit-C1, POD Deck Lite-A1, and Document Insertion Unit-K1 are optional.
Chlorine-free paper can be used with this machine.

Storing Printouts

When handling or storing paper printed by this machine, be careful of the following points.

How to store printouts

Store paper on a flat surface.
Avoid storing printouts in folders made of PVC material, as this may cause the toner to melt and stick to the PVC material. Toner may peel when printouts are folded or creased.
Store printouts in the condition where they are not folded or creased as toner may peel.
Put printouts in a binder when storing for a long period of time (two years or longer).
Printouts may discolor when stored for a long period of time.
Avoid storing printouts in a location subject to high temperatures.

Precautions when sticking printouts with adhesive

Be sure to use insoluble adhesive.
Test the adhesive on an unneeded printout before using.
Before stacking printouts that stuck with adhesive, check that the adhesive completely dried.
22H4-01J