Viewing e-Manual

Symbols Used in This Manual

The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety.
 
Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine safely, always pay attention to these warnings.
 
Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the machine safely, always pay attention to these cautions.
IMPORTANT
 
Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine correctly, and avoid damage to the machine or property.
NOTE
 
Indicates a clarification of an operation, or contains additional explanations for a procedure. Reading these notes is highly recommended.
 
Indicates an operation that must not be performed. Read these items carefully, and make sure not to perform the described operations.

Keys Used in This Manual

The following table provides a few examples of how keys to be pressed are expressed in this manual:
Keys
Example
Control Panel
Key icon + (Key Name)
 (Additional Functions)
Touch Panel Display
[Key Name]
[OK], [Cancel], etc.
[Key Icon]
[], [], etc.

Illustrations Used in This Manual

The machine illustrations used in this manual are those of the imageRUNNER 2545i with the following optional equipment attached: the Inner Finisher-B1, Inner Finisher Additional Tray-B1, and CST. Feeding Unit-AE1.

Displays Used in This Manual

Screen shots used in this manual may differ from actual displays depending on the machine configuration.
The keys to be pressed are marked with a , as shown below.
When multiple keys can be pressed, all of them will be marked. Select the keys best suited to your needs.
0XFX-09C