Registering a Fax Connected by USB

You can register a fax connected by USB in the operating system.

Prerequisites

Confirm that the following conditions are satisfied. Complete the preparation operations.
System Requirements
Installing the Driver
Confirmation of driver names corresponding to the fax
For fax names corresponding to printers, refer to the Readme file.
Installation of the optional USB interface board (if required with the fax you are using)

Procedures

1.
Display the [System Preferences] dialog box of the operating system → click [Printers & Scanners].
2.
Turn the fax on → connect the fax and the computer by USB cable.
3.
Check that the connected fax and model are displayed in the dialog box.
When using a device via a USB connection in macOS 10.12.4 or later, the operating system may block loading of the driver and prevent fax transmission, depending on the model of the device. If so, click the subsequent "Open details."
[+][-]
If the connected printer and model are not displayed, perform the following procedure.
4.
Click [+] at the bottom of the displayed dialog box.
If a pull-down menu is displayed after you click [+], select [Add Printer or Scanner].
5.
Select [Default] in the toolbar → select a fax from the list.
Select a fax displayed as "USB" in [Kind].
6.
Select [Select Software] from [Use].
7.
Select the driver corresponding to the printer from the list in the [Printer Software] dialog box → click [OK].
8.
Change [Name] for the fax as necessary → click [Add].
9.
Check that the registered fax and model are displayed in the dialog box.
Set the device options as necessary.

Related Topics